Steel Tank all you need about up ground Steel Storage Tank
In this post, we will talk about the manufacture and installation of steel tanks.
The steel tank consists of three main parts:-
1- bottom plates
2- Shell Plates
3- roof plates
Each of these parts is of course cut and manufactured to different specifications
The main part is welding. It is the main component in the assembly and assembly process
If we talk about the first part, which is the bottom plates, then most of the joints are overlap joints.
And shell plates, the welding is butt weld, whether in vertical welding or horizontal welding
But the roof plate is welded like the bottom plates.
One of the most important conditions required is the NDT tests.
These tests are carried out according to the ASME Standard.
And don't forget the inlet nozzles and out nozzles.
The locations of these openings must be located far from the intersections of the seams.
And also openings for maintenance and access to the tank.
One of the most basic operations in the process of building and manufacturing steel tanks is the stage of internal and external paints.
As steel, by its nature, reacts with oxygen, causing rust, and therefore the paint process was one of the most important operations after the completion of manufacturing and installation.
The tank will then be filled with the purpose of hydrotest and settlement.
you Can Check these video to understand the idea and How it Build.